PowerBrace™ Foundation Wall Repair for Failing Walls in Greater Edmonton

Permanently Stabilize Your Bowing or Buckling Foundation Walls

What It Does:

When foundation walls begin to buckle, bow or tilt inward, homeowners are correct to be alarmed. Outside pressure from soil and water can cause foundation walls to collapse!

The PowerBrace™ is a patented foundation wall repair system that's designed to stabilize failing basement walls and provide the potential to straighten walls over time.

These steel I-beams will stabilize the wall in its current position without further adjustment. Over time, the PowerBrace™ System can be tightened to make bowing or tilting walls straighter and more vertical.

Bracing Your Bowing, Buckling Foundation Walls

Sub-par I-beam systems will rust and deteriorate over time. The PowerBrace™ system includes a zinc coating that protects it from this kind of corrosion.

We recommend repairing bowing or buckling foundation walls with Geo-Lock™ Wall Anchors when possible.

However, this wall anchor system requires access to the earth outside the foundation. Sometimes, property line issues eliminate this as an option.

When outside access is impossible, ask our foundation specialists to explain the advantages of the PowerBrace™ System.

Our experts will be able to examine your foundation and determine if this repair strategy is the best fit for your structural issues.

The PowerBrace™ employs a unique, patented approach to stabilizing and straightening bowed and buckled foundation walls over time.

More About Foundation Wall Repair

More About Our Foundation Repair Everbrace

Installing the PowerBrace™ Wall System

The PowerBrace™ can be installed with no disruption to outside soils or landscaping. This foundation wall system installs quickly in your home, immediately and permanently halting the inward movement of your foundation walls.

• Cut Braces
• Secure Hardware
• Fine-Tune Positions
• Attach Braces
• Straighten Walls

Cutting Wall Braces

The PowerBrace™ is a wall repair system based on solid steel I-beams. The I-beams and their support hardware have a special rust-resistant zinc coating to ensure your design looks and performs like new for decades.

Our foundation experts will determine how many PowerBrace™ supports are required for your wall repair. Before a PowerBrace™ support is installed in your home, it must be cut to size. Based on the wall height of your basement, we will cut each beam to the appropriate height.

Securing The Floor Joist Hardware

Next, the top of each brace is attached to a floor joist near the mudsill at the top of the wall. The specially designed bracket is bolted to the floor joist and contains a large-diameter bolt for adjusting and tightening after the installation.

A PowerBrace™ installation will not damage your floor framing. To ensure the proper performance of this wall repair system, your foundation contractor will inspect the strength of your floor joists before recommending this repair strategy.

Fine-Tuning The PowerBrace™ Positions

The PowerBrace™ Foundation Wall System works best when each I-beam is upright or vertical. The contractor will use a level to fine-tune the position of each beam in preparation for the next step.

At Basement Systems Edmonton, we take pride in the lasting quality of each of our installations. We stand by each PowerBrace™ installation with our 25-year warranty against manufacturing defects and our installation warranty.

Attaching Braces To The Floor

To complete the installation of your PowerBrace™ System, each beam is attached to your concrete floor with a special bolt-in-place bracket.

Unlike other foundation wall repair methods that install from the inside of the foundation walls, the PowerBrace™ System spans the entire height of the foundation walls. This makes the PowerBrace™ system suitable for repairing walls that bow and buckle from the middle. Additionally, the PowerBrace™ can repair walls sliding inwards from the bottom or tilting inwards from the top.

Straighten Walls

The PowerBrace™ System includes a unique, patented adjustment mechanism, unlike any other I-beam foundation wall repair system.

The bracket that anchors each I-beam to a floor joist includes a long bolt that can be tightened over time to advance the I-beam. This can force a bowed or buckled foundation wall back toward its original vertical and straight position. Straightening potential depends on several factors, including soil conditions outside the foundation.

Your Foundation Wall Repair Contractors In AB

At Basement Systems Edmonton, we want to help you restore your bowing, buckling, tilting, or shifting foundation walls to their original, structurally stable condition. To help you decide if we're the company for you, we offer free foundation wall repair quotes throughout our Alberta service area.

Our free estimates include a no-obligation written price quote, an on-site consultation, and a copy of our 96-page full-color book "Foundation Repair Science."

We proudly serve St. Albert, Edmonton, Sherwood Park, surrounding areas such as Grande Prairie, Red Deer, Camrose, Spruce Grove, Fort Saskatchewan, Lloydminster, Leduc, and many other parts of AB.

Looking for a price? Get a no cost, no obligation free estimate.